K-05R PETG quality...
Reference: K-05R
Printing: FDM
Fast shipping
Thickness: 1.75mm
Coil: 1 kg.
Filament length: 340m
Red color
Weight: 1.17 kg.
Reference: K-05R
Printing: FDM
Fast shipping
Thickness: 1.75mm
Coil: 1 kg.
Filament length: 340m
Red color
Weight: 1.17 kg.
English:Reference : K-09.03
- Computer or PC running Windows 7 or later, OS X 10.6 or later, ChromeOS (Chromebook), Linux (Raspberry Pi), Android or iOS .
- USB 2A male to “micro B” cable to connect your computer to the BBC micro:bit. This is the same cable normally used to connect a smartphone to a computer.
- Internet access .
- Operating frequency : 2402.0 to 2480.0 Mhz.
- Output power < 4dBm.
Measurements: 7.5 x 13 x 3.6 cm.
Weight: 0.55 g.
Power :
- When the BBC micro:bit is not connected to your computer via the USB cable, you will need two AAA batteries.
Reference : K-09.07
It has input for : USB and mini USB
Input : DC 5V - 2.1A
Output : DC 5V - 2.1A
Reference : K-09.18
7" touch screen.
Dimensions : 194 x 110 x 20mm.
Visible screen size : 155 x 86 mm.
Screen resolution pixels : 800 x 480.
Weight : 0.44 Kg
Reference : K-09.19
Sony IMX708 image sensor with integrated IR filter.
11.9 MP native resolution.
Motorized autofocus.
Phase detection autofocus (PDAF) for fast focusing.
Angle: standard (75°) or wide angle (120°).
7.4 mm sensor diagonal.
Pixel size: 1.4 ?m × 1.4 ?m.
Photo resolution: 4608 × 2592 pixels.
Video modes: 1080p50, 720p100, 480p120.
Output: RAW10.
High signal-to-noise ratio (SNR).
Integrated 2D dynamic pixel defect correction (DPC).
Sensor with I2C-controlled focus.
Reference : MADU-03
Characteristics : Energy pack
Reference: MADU-07
Pack includes:
1 Laboratory power supply (ref. K-09.1)
1 DT-9208A multimeter (ref. K-09.02)
11 Micro BIT V2 (ref. K-09.03)
12 5000 mAh power bank (ref. K-09.07)
1 Desktop Raspberry Pi (ref. K-09.17)
1 Touchscreen for Raspberry Pi (ref. K-09.18)
1 Camera for Raspberry Pi v3 (ref. K-09.19)
10 Cebek piano emulator (ref. EM16)
Reference: UNO R3
Microcontroller: ATmega328
Operational Voltage: 5v
External power (recommended): 7-12v
External power (limits): 5-20v
Digital I / O pins: 14 (of which 6 with PWN function)
Analog pins (input): 6
DC Current I / O Pin: 40 mA
DC Current 3.3V Pin: 50 mA
Flash Memory: 32 KB (of which 0.5 KB are occupied by the bootloader)
SRAM: 2 KB
EEPROM: 1 KB
Speed: 16 MHz