Reference: C-9940

Characteristics : to investigate and search for traces

Box measurements: 210 x 180 x 60 mm.

Reference: C-9941

Characteristics : Water treatment

Box measurements: 205 x 160 x 60mm.

Reference: PENCIL3D

Discharge mode: hot melt extrusion molding mode

Molding: three-dimensional molding.

Print range: unlimited

Turning speed: adjustable

Temperature: 60ºC - 230ºC adjustable

Operating voltage: 12V 2A equipment

Nozzle diameter: 0.7mm

Box dimensions: 21.4 x 16.5 x 5.6 cm.

Box weight: 0.285 g.

Reference: EM16

Features: Works with fruits

Power: via USB: 5VDC

Mini-B USB jack on-board

uMain Control IC: ATMEGA32U4u MICROPROCESSOR

Measures: 48 x 94 x 10.8 mm

Box dimensions: 7.5 x 4.5 x 13 cm.

Box weight: 0.135 g.

Reference : C-9979

Weight: 200 gr. approx.

Measures approx. assembled kit, length 25 cm approx. , height 8 cm approx. and width 14 cm. approx.

Reference: C-0112B

Kit Contents:

Solar motor - 1

Photovoltaic solar cell - 4

4-blade plastic propeller - 1

Motor mount with adhesive - 1

Hub - 1

Large propeller blades - 3

Screws - 3

Plastic brackets - 6

Double-sided adhesive foam pads - 6

Colored cables with alligator clips - 10

Cardboard spiral for cutting - 1

Cardboard blade for cutting - 1

3-blade cardboard propeller for cutting - 1

Plastic pulley Ø8 mm - 1

Plastic pulley Ø12 mm - 1

Light bulb - 1

E10 lamp holder - 1

Red LED - 1

Green LED - 1

Yellow LED - 1

Box dimensions: 11 x 9 x 17 cm.

Box weight: 0.205 gr.

Reference: EK-1025

Box dimensions: 39 x 29 x 8 cm.

Reference: C-9898

Box dimensions: 40.5 x 29 x 10.5 cm.

English:Reference : K-09.03

- Computer or PC running Windows 7 or later, OS X 10.6 or later, ChromeOS (Chromebook), Linux (Raspberry Pi), Android or iOS .

- USB 2A male to “micro B” cable to connect your computer to the BBC micro:bit. This is the same cable normally used to connect a smartphone to a computer.

- Internet access .

- Operating frequency : 2402.0 to 2480.0 Mhz.

- Output power < 4dBm.

Measurements: 7.5 x 13 x 3.6 cm.

Weight: 0.55 g.

Power :

- When the BBC micro:bit is not connected to your computer via the USB cable, you will need two AAA batteries.

Reference: UNO R3 

Microcontroller: ATmega328

Operational Voltage: 5v

External power (recommended): 7-12v

External power (limits): 5-20v

Digital I / O pins: 14 (of which 6 with PWN function)

Analog pins (input): 6

DC Current I / O Pin: 40 mA

DC Current 3.3V Pin: 50 mA

Flash Memory: 32 KB (of which 0.5 KB are occupied by the bootloader)

SRAM: 2 KB

EEPROM: 1 KB

Speed: 16 MHz